Duct Manufacturing Coil Lines

Pro-Ductomatic 

Pro-Fabriduct

Formtek Iowa Precision Industries Pro Fabriduct coil processing duct line complete to the following specifications: 

4 x 1525mm x 5 tonne Decoilers featuring individual hydraulic drives with hydraulic hold down arms 

• Bottom pay off via auto grid feed to auto select station and infeed table to processor.
• Pro Ductomatic processor unit to 1525 x 1.6mm material and features SMACNA beader.
• Notching heads for drive cleat, TDC/TDF, Pittsburgh and Snaplock.
• Hydraulic shear cut off and forming head for male Pittsburgh and Snaplock.
• 3 metre transfer table to female Pittsburgh station.
• Mark-XV rollforming station for Pittsburgh and Snaplock female seams.
• 3 metre transfer conveyor and positioning to TDC/TDF forming station.
• 14 station TDC/TDF Duplex rollformer for 35mm flange.
• Feed table to wrap brake.
• Wrap brake and 3 metre runout table.
• CNC fully programmable touch screed from centrally located control console.
• Line offered and U shape configuration and occupy floor space approximately 6.8m x 16m.  You to advise whether line to run right hand U or left hand U direction.
• Power requirements:  125amp, 415v, 50Hz
• Air requirements: 15cfm at 90psi.